Sysmac Industrial IDE
programming, simulation, and monitoring in a simple interface.
Brochures
It Has Never Been Easier To Try Out Sysmac
The “One Software” Sysmac Bundle
| IDE | Sysmac Studio | SYSMACAD201L |
| CPU | NX502-1300 CPU | NX5021300 |
| PSU | S8VK-G06024 Book Type Power Supply | S8VKG06024 |
The “One Connection” Sysmac Bundle
| IDE | Sysmac Studio Lite | SYSMACLE201L |
| CPU | NX102-9020 Modular CPU | NX1029020 |
| Power Supply | S8VK-G06024 Book Type Power Supply | S8VKG06024 |
| IPC | Omron IPC | NYB6540530 |
The “One Controller” Sysmac Bundle
| IDE | Sysmac Studio | SYSMACBA201L |
| CPU | NX102-9020 Controller | NX1029020 |
| PSU | S8VK-G06024 Book Type Power Supply | S8VKG06024 |
| Safety | NX-SL5500 Safety Controller | NXSL5500 |
| Safety IO | NX-SID800 Safety IO | NXSID800 |
| Local IO (1) | NX-ID4442 Local IO | NXID4442 |
| Local IO (2) | NX-OD4256 Local IO | NXOD4256 |
| Coupler | NX-ECC202 Coupler | NXECC202 |
Where do I get Started with Sysmac?
Chase Myles of Omron has a great up and running series on YouTube.
How can the Programmable Controller "SYSMAC" be connected to a personal computer through a serial port or an Ethernet? Is the FinesGateway necessary?
There are two ways: using the FinsGateway Ver.3 or not using it.
In the case when an application to be developed with the VisualC++ or the VisualBasic may be used through other interface methods, it is better to utilize the FinsGateway Ver.3.
On the other hand, in the case when the connection is done only through a higher-level link, it is possible to open a COM port directly from the VisualC++ or to issue a higher-level link command disclosed in the manual by using the VisualBasic and the ActiveX Control for commercially available serial access without using the FinsGateway Ver.3.
In the case of Ethernet interface
There are two ways: using the FinsGateway Ver.3 or not using it.
In the case when an application to be developed with the VisualC++ or the VisualBasic may be used through other interface methods, it is better to utilize the FinsGateway Ver.3.
On the other hand, in the case when the connection is done only through an Ethernet interface, it is possible to call up the WinSock2 library directly from the VisualC++ or to issue FINS/UDP/IP commands disclosed in the manual by using the VisualBasic and the ActiveX Control for commercially available WinSock2 without using the FinsGateway Ver.3.
How can we convert SYSMAC Support Software file SP1 by CX-Programmer FA Integrated Tool Package?
Able to read it directly.
Select the FILE OPEN function on menu, then we can save as SP1 file: SYSMAC support soft ladder program (*SP1).
Before CX-Programmer Ver.2.1
File Conversion Utility convert SP1 file specifying CXT file to read SP1 File.
Then we can save as CXT file. Then we can open CXT file by CX-Programmer.
Automotive Case Study
Omron’s Sysmac integrated automation platform is a tool to meet these objectives. The Sysmac platform includes powerful machine automation controllers (MACs), intuitive human machine interfaces (HMIs), and fast networking via EtherCAT or Ethernet/IP. These complementary technologies support a range of advanced functions, including motion, safety, vision and robotics.
Who is Mechatronic Solutions?
Mechatronic Solutions is a distributor of OMRON automation products and solutions for Minnesota, Wisconsin, North Dakota, and South Dakota. We have a team of technical experts on staff to help select the right automation products for your application. If you have any questions or would like to speak with a member of our team, contact us at (763) 447-3407 or fill in the Contact Form.
Why Sysmac?
Created to give machine developers complete control from a single environment, Sysmac Studio integrates configuration, programming, simulation, and monitoring in a simple interface. This advanced software tool is the sole software required for the NJ-Series machine automation controller, which brings together logic, motion, and vision onto a single platform.
Feasibility Testing
Proof of concept or feasibility testing is an important part of Mechatronic’s approach to providing high quality solutions and exceptional results for our customer’s automation projects. Mechatronic Solutions has an experienced team of Application Engineers and an Automation Solutions Center with extensive demo equipment to conduct testing.
Some of Omron’s Sysmac Hardware
- NX-series controllers
- NJ-series controllers
- NA-series HMI
- NX-series I/O and safety
- G5-series servo
- MX2-series and RX-series frequency inverter
- FH and FQM vision system and sensor
- GX network components
- E3 N-Smart sensors
- ZW-series measurement sensors
CONTACT MECHATRONIC SOLUTIONS TODAY
Need engineering work and feasibility testing in Minnesota, Wisconsin, North Dakota, or South Dakota… Call Mechatronic Solutions at 763-447-3407 or fill in the Contact Us form today to work with our application engineers or schedule a demo.