Omron Temperature Controllers
Precise temperature control with adaptive (PID) control for any size and application
On-Panel or In-Panel. Digital or Analog.
Omron has all of the temperature controllers to serve your needs.
Brochures
How Do I Find the Right Temperature Controller For Me?
We need to start a fan when the temperature rises and stop it when the temperature drops.
Set cooling control (direct operation).
Change the direct/reverse operation setting to direct operation.
For example, if you set the temperature (e.g., to 30 °C), the control output will turn ON when the temperature is above the set temperature and will turn OFF when it’s below the set temperature.
If the temperature rises above the set temperature again, the output will turn ON again.
The point at which the output turns ON is also affected by the hysteresis setting.
What is "Heating and Cooling Control"?
Temperature control over a controlled object would be difficult if heating was the only type of control available, so cooling control was also added. Two control outputs (one for heating and one for cooling) can be provided by one Temperature Controller.
Heating and Cooling Outputs
Set cooling control (direct operation).
Change the direct/reverse operation setting to direct operation.
For example, if you set the temperature (e.g., to 30 °C), the control output will turn ON when the temperature is above the set temperature and will turn OFF when it’s below the set temperature.
If the temperature rises above the set temperature again, the output will turn ON again.
The point at which the output turns ON is also affected by the hysteresis setting.
What happens if the Temperature Sensor terminals are connected with the wrong polarity?
Thermocouples
If the polarity is connected in reverse, the Temperature Controllers will display a falling temperature when the temperature is actually rising.
Platinum Resistance Thermometers
If the polarity between A and B are reversed, “S.Err” will be displayed.
There is no polarity between B and B.
Make sure that the polarity and terminals are correctly connected.
Can Temperature Controllers with a heater burnout alarm detect heater burnouts when using thyristor control?
No, it cannot.
When thyristor control (phase control) is used, the control output is a current output. Therefore the heater burnout alarm of the Temperature Controllers cannot be used.
See whether any of the following methods can be used.
Use G3PX Digital Controllers with Heater Burnout Detection.
Semiconductor Case Study
When the “Temperature Uniformity Control” is used, the optimized temperature setting that uniformizes the surface temperature of the wafer is automatically calculated. In addition, the “Disturbance suppression function” suppresses temperature fluctuation caused by routine disturbance. With these technologies, we can improve quality and productivity without spending much engineering effort.
Who is Mechatronic Solutions?
Mechatronic Solutions is a distributor of OMRON automation products and solutions for Minnesota, Wisconsin, North Dakota, and South Dakota. We have a team of technical experts on staff to help select the right automation products for your application. If you have any questions or would like to speak with a member of our team, contact us at (763) 447-3407 or fill in the Contact Form.
Why Omron Controllers?
Omron has developed a wide range of temperature controllers that can help keep your components and automation flows safe..
Packaging Material Case Study
Omron’s temperature sensor for the packaging machine can be installed near the sealing surface, and the sealing surface temperature can be controlled. With the “Automatic filter adjustment function” the sealing surface temperature can be stabily controlled to the target temperature and temperature fluctuations during packaging machine operation can also be quickly suppressed.
Some of Omron’s High End Temperature Controllers
- E5CC
- E5GC
- E5C2
- EJ1 Modular Temperature Controller
- E5AN-HT Temperature and Process Controller
CONTACT MECHATRONIC SOLUTIONS TODAY
Need temperature management solutions in Minnesota, Wisconsin, North Dakota, or South Dakota… Call Mechatronic Solutions at 763-447-3407 or fill in the Contact Us form today to work with our application engineers or schedule a demo.